Valworx 560232F electric actuated 2-piece stainless steel ball valves for on-off control of water, air, oil, and other media compatible with the materials of construction. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear system rotates the ball valve. The motor is stopped by internal cams striking micro switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. High temperature valve mounting kit available for extended temperature range or wall mounting applications.
Ball Valve Standard Features1000 PSI working pressure (see P/T chart) Direct mounting valve per ISO5211 Full port for unrestricted flow 316 stainless steel body, ball and stem Blow out proof stem RTFE ball seats extend cycle life Triple PTFE/Viton stem seal design, live loaded
Electric Actuator Standard FeaturesHighly visible LED light gives continuous actuator status indication Multi-voltage capable with auto-voltage sensing Electronic torque limiter - protects against valve jams Anti-condensation heater Manual override with dome style visual valve position indicator All electrical connections via external DIN plugs (included) - no need to remove cover Two dry contact limit switches used to confirm open/closed valve position Rugged IP67 weatherproof housing, CE marked
Options (see Accessories tab)
Ball Valve Standard Features
Electric Actuator Standard Features
Options (see Accessories tab)
| Type | Electric Actuated 2 Way Ball Valve- Multivoltage |
|---|---|
| Voltage | 24 to 240 Volts AC/DC (1 ph,50/60Hz) auto-voltage sensing |
| Current Rating | 0.8A @ 110VAC, 0.5A @ 240VAC, 3.3A @ 24VAC 2.7A @ 24VDC (full load amps) |
| Cycle Time | 58 seconds per 90° rotation (+/- 10% no load) |
| Pipe Size | 4" NPT female |
| Port Size | Full Port, orifice 3.94 inches, Cv 710 |
| Pressure Rating | 800 PSI CWP non-shock (see P/T chart), Vacuum service to 29"Hg, 25 PSI steam with kit |
| Valve Temperature Range | -4 to 392 °F (-20 to 200 °C) |
| Actuator Temperature Range | -4 to 158 °F (-20 to 70 °C) |
| Valve Body | 316 Stainless Steel |
| Ball and Stem | 316 stainless steel |
| Ball Seats | RTFE (reinforced Teflon) |
| Stem Seals | PTFE/ Viton |
| Duty Cycle | 75% |
| Enclosure | Anti-corrosive polyamide, SS fasteners |
| Enclosure Rating | IP67 weatherproof, UV protection |
| Electrical Connections | DIN plugs with cable entry (included), optional 1/2" conduit plugs |
| Valve Position Confirmation | 2 x SPST auxiliary limit switches rated 3A@125/250VAC,30VDC resistive load |
| Manual Override | Hand knob |
| Motor Protection | Electronic over-torque with LED status light |
| Anti-Condensation Heater | 4 watts thermostatically controlled |
| Max Fluid Velocity | 10 feet per second |
Digital Positioner System
5616C DPS-Digital Positioner System Kit 4-20mA - Installed
Stock #: 561108C
Usually Ships: 4- 6 Weeks
Price: $655.59
Buy 3 or more for $590.03 each
5616C DPS-Digital Positioner System Kit 0-10v - Installed
Stock #: 561109C
Usually Ships: 4- 6 Weeks
Price: $655.59
Buy 3 or more for $590.03 each
Failsafe Battery Kit
Price: $655.60
Buy 3 or more for $590.04 each
Price: $655.59
Buy 3 or more for $590.03 each
Connectors & Cables
Price: $5.60
Buy 10 or more for $5.04 each
Price: $35.84
Buy 10 or more for $32.26 each
High Temperature Mounting Kit
Price: $120.80
Buy 3 or more for $108.72 each
Spring Check Valve
5602 Series Product Data Sheet 5610/5616 Series On/Off Electric Actuators - Installation Instructions 5610/5616 Series Electric Actuators with DPS Positioner - Installation Instructions
Price: $1,002.90
Buy 3 or more for $902.61 each
Price: $1,482.12
Buy 3 or more for $1,333.91 each
